Industrial Articulating Borescope with Lens Diameter 8.0mm, 1Mt Working Cable, Cleaning Engine
Detailed Photos
Product Parameters
Technological superiority
- Portable design, easy to operate, long working hours, in a narrow space to check the various industrial pipes or complex equipment of corrosion, cracks, welding, foreign body, wear and internal parts processing, and through a fine comprehensive detection;
2. Ergonomic design concept, appearance atmosphere, perfect use feeling, one hand grasp, handle set lock lever, can be inserted tube bending part lock at a specific Angle;
3. Mechanical control can be rotated in two directions, the single-side bending Angle is greater than 180 degrees, flexible control, labor-saving, high working efficiency, and low failure rate compared with electric power steering;
4. Excellent operation, can be easily connected to the mobile phone or PC terminal display, without external power supply after the battery;
- Front-end super-bright LED lighting, optimize the lighting system design;
6. The front end can be equipped with a cooling device at high temperature (300ºC), which enables the probe to enter the high temperature area for observation;
1. Camera parameters and system configuration
model |
C L801T |
Lens diameter |
Φ 7.5mm |
pixel |
One megapixels |
Probe length |
17 MM |
Image sensor |
1/6inch |
Visual Angle |
120 Degrees |
Depth of field (visual range) |
From 10-100 mm |
illuminant |
8 LED light sources |
Observe the direction |
Front-end direct view |
thermostability |
300° |
Cooling hole pipe diameter |
8mm |
Insert tube material |
Stainless steel wire woven tube / set pipe |
Insert tube length |
Standard: 1.0m |
Bend Angle (upper / bottom) |
180° |
Position fixed |
One key lock |
image resolution ratio |
1280*720JPG |
Video resolution |
1280*720MP4 |
attended mode |
Android or Windows |
The Data I / O port |
The USB2.0 port is available |
Key function |
Take photos, turn on the lights |
internal storage |
computer. Mobile phone storage |
brightness control |
Manual adjustment, section 3 gear |
construction material |
Plastic PC case |
Product weight |
Including packaging equipment: <1.5 kg, bare machine 0.5 kg |
white balance |
automatic white balance |
2. Working environment
System operating temperature |
0°C50°C |
ambient humidity |
15-90%RH |
Video probe operating temperature |
0°C 300°C, below 0°C should reduce boot operations |
waterproof |
The inserted tube and probe can withstand the IP58 waterproof |
storage temperature |
0°C60°C |
Packaging accessories |
hold-all. Clean the bag. Manual et al |
working air pressure |
6-7kg/cm^2 |
auxiliary instrument |
air compressor |
Notes for high temperature detection:
1. In the work, the compressed air can not be interrupted, which will lead to lens damage;
- Air pressure 6-7kg / cm ^ 2, stop for 5 minutes, cool the lamp before use;
Compressed air pressure: 5.5-6.9bar, clean, dry compressed air cooling effect will be better;